Push To Talk Box

Push To Talk Box – Latching XLR A/B


Available on backorder

New design now shipping!

Now with a completely redesigned enclosure, the Push To Talk Box is CNC milled from a solid block of aluminum with a black anodized finish and laser etched graphics. The new design is also 12mm shorter and 1mm less wide. It also features a tapered front to angle the foot switch towards your foot for easier channel switching.

Momentary Version Here

pdf Download the Product Manual

The Push To Talk Box™ is an XLR A/B switcher that allows for a vocal microphone to be used on a main channel and talk back channel.  Its most common use is in a live or studio setting.  A vocal mic is plugged into the input, and two separate outputs are sent to the FOH or monitor sound board.  The default channel goes to the live mix just like using a microphone on its own.  The secondary channel is activated with the foot switch, allowing for different effects or to talk through a headset to your sound tech, or to your band through in ear monitors.  When the secondary channel is active, the primary channel is completely muted with no bleed from the talk back channel. When the primary channel is active, the secondary channel remains muted.

Features quiet switching for both dynamic microphones AND +48V phantom powered condenser microphones!

We designed this from the ground up to be the sturdiest, highest quality momentary XLR switcher ever made!

Momentary vs. Latching Version

The Momentary version features a silent, clickless switch. The switch must be held down to toggle the channels. When the switch is released, it returns to the normal state.

The Latching version features a “click” switch. To toggle the channels, the switch is pressed and released. The channels remain switched until the switch is pressed again.

  • Quiet XLR switching
  • Internal ground/lift switch that isolates Output B ground to eliminate possible ground loop hum
  • Enclosure CNC milled from a solid block of aluminum, black anodized finish, laser etched graphics
  • Red LED (activated when the channels are switched)
  • Includes silicone anti-slip pad with backing adhesive
  • Includes Throne Room Pedals 9V power supply (US)
  • Perfect for the studio, touring bands, churches and houses of prayer!

Additional information
Weight8.83 oz
Dimensions4.85 × 2.7 × 2.15 in
Power Requirement

9V DC center negative, Throne Room Pedals power supply included


Latching switch


Neutrik gold plated XLR




Black anodized, laser etched


Military grade point-to-point wiring